This notch is also safe because there is little risk of kickback.

Nov 27, How to make a felling cut Straight from behind felling cut. For small trees, the easiest way to saw the felling cut is straight from behind. This Bore cutting. To be able to perform the safe corner method and turn around method you need to master bore cutting. Safe corner method. As Estimated Reading Time: 7 mins. For your tree to have a smooth fall, you will make a V-shaped notch on the side of the tree that’s facing the direction where you want it to fall.

Cut at about the knee-height of a regular-sized person. This V-shaped cut should reach the center of the tree, and the tips of the top and bottom cut must meet in the middle. Make A Back CutEstimated Reading Time: 7 mins.

Make a Horizontal Cut – This cut should not be higher than your hip, and it should extend no more than one-third of the way into the tree. Keep in mind that the tree will fall perpendicularly to this horizontal cut. Make a Wedge Cut – The slice that is produced by this cut should look like a slice of orange.

Facing The Tree (Conventional Face Cut) Gunning Or Horizontal Cut – Assess The Tree’s Lean – Mark The Location Of The Rectangular Holding Wood – Set Your Dogs On The Bottom-face Corner Of The Rectangle – Make The Gunning Cut (Dictates The Direction Of Tree Fall) Sloping Cut – Sloping Cut Is At A 45o Angle To The Gunning Cut (Goal).

Aug 21, Tree cutting and felling in tight areas. Showing you our Ford f service body with gooseneck setup.

Choose the starting point For this cut, you can opt to continue cutting at the same angle that the top cut ends.

Support the channel by subscribing, sharing and leaving your feedback in the comments 💯 Thanks for watching! 🌲 Business Contact: Kenny's Tree.